UpKeen: Project By CyberIndeed.com

Progress:

How To Prepare Wooden Buildings For Wintering

How To Prepare Wooden Buildings For Wintering

Date: 05.17.2022

Written By

Editorial Staff

I am a blog scientist by the mind and a passionate blogger by heart ❤️. Fountainhead of upkeen. I am a freelance writer and lover of all things tech, crafting and general geekery. i am currently living in New York, United States.

Wooden buildings can last long enough if they are properly looked after and protected from the harmful effects of external factors. One of the most important activities in the operation of timber buildings is preparation for the winter period.

Table of Contents

Why is it important to prepare wooden buildings for the autumn-winter period

Wooden Buildings

The worst enemy for wooden buildings is moisture. If its level is too high, then decay processes begin in the wood, which leads to cracking and fungal damage. Such structures not only lose their appearance, their service life is reduced, and rapidly multiplying mold spores pose a threat to the health of humans and animals living in these buildings.

In the autumn-winter time, the level of precipitation increases, temperature drops give an additional load on the material, therefore it is very important to start preparing all wooden buildings on your site even before the onset of cold weather and the rainy season.

Wooden Buildings
  1. The very first step should be to check the tightness of the roof. Even a slight violation of its integrity, subject to temperature differences and under the weight of snow, can lead to serious leaks. Wooden structures and wood trim are excellent breeding grounds for microorganisms and decay.
  2. Further, it is important to check all the life support systems of buildings, if any: water supply, sewerage, heating pipes are also checked for leaks, if necessary, to protect wooden building it must insulated with good home insulation material.
  3. The walls of wooden buildings should “go into winter” without cracks and gaps. They are carefully sealed, and all the wood from the outside is treated with special compounds and antiseptics, or painted.

What coatings to choose for the processing of wooden buildings

Wooden Buildings

Let us consider in more detail how to protect wooden buildings from the harmful effects of the vagaries of nature using special coatings for wood, especially in winter. So, there are many options for wood processing compounds, here are the most popular ones.

Impregnation for wood. The compositions have two different directions: preparation for painting or as an independent tool. There are three types of impregnations:

  • waterproof,
  • antibacterial,
  • fire protection.

When choosing impregnations as a topcoat, it is important to remember that it will have to be renewed at least once every 2 years.

Such wood treatment products have translucent colors, most often natural shades, which allows you to emphasize the naturalness and special structure of wood.

Wood paints. Facade paints are not only protective but also decorative. They have important functions:

Wooden Buildings
  • resistance to temperature fluctuations,
  • moisture protection,
  • color fastness to fading and abrasion,
  • coating strength,
  • environmental friendliness and safety,
  • the material covered with paint must “breathe”,
  • fire safety.

Antiseptics for wood. Antiseptics penetrate deeply into wood fibers and protect against pest, rotting and reproduction of microorganisms. Among such products are waxes, varnishes, and protective oils.

Wood primers. Special preservative solutions – primers and oils – form a film on the wood surface that prevents cracks and moisture ingress, but at the same time, air exchange is not disturbed.

Fire protection for wood. Fire retardants are refractory compounds that, when exposed to fire, are brought to the surface and do not allow the wood to ignite for up to several hours.

Wooden Buildings

As practice shows, one means of protecting wooden buildings is indispensable. If the manufacturers promise a generic tool, then most likely one or more of its functions are not working. Therefore, in order to effectively build the protection of your house or other wooden structure, it is better to carry out stepwise processing with several means.

How to properly handle wooden buildings

The processing of timber buildings is divided into three stages:

  1. Primary processing – is carried out even before the construction of the building by the manufacturer or builders before starting work. Particular attention is paid to the processing of joints, contact with the ground, as well as when installing buildings in places of high humidity.
  2. Preventive treatment is a very important stage of treatment that will allow you to preserve the original appearance and performance properties of wood for many years.
  3. Medical treatment is carried out when the tree has already been subjected to the destructive effects of moisture and microorganisms.

We will focus on the prevention carried out to prepare building for the winter period. So it is important to observe the following steps:

Wooden Buildings
  1. Treatment with special antiseptic compounds for deep penetration. This step will protect the timber structure from rot, mold, mildew, and insect pests.
  2. It is important to process the ends separately, with a product with good moisture-proof properties. Moisture exchange will work in such a way that will not allow the wood to retain excess moisture, but will also prevent over drying, and, therefore, will prevent cracking.
  3. A rough primer is able to close micro-cracks in wood and increase adhesion.
  4. Next, a topcoat is applied, most often paint and varnish, which will provide maximum protection of the material and emphasize the design of the house or outbuilding. With the help of colored paints, you can achieve any color and shade, choose matte or glossy options. To preserve the natural beauty of the tree, you can use transparent paints and varnishes.

In order for the processing of wooden buildings at home to be of high quality, be sure to maintain the necessary time for each layer to completely dry out at every stage.

For processing, it is better to use different, convenient for each tool, tools. So, paint can be applied with a roller, and in hard-to-reach places (corners and ends) with a brush. In some versions, it is possible to use a spray gun.

Proper preparation of timber buildings for the autumn-winter period is a rather laborious and non-budgetary process, but ignoring it can become even more expensive. Prevention can prolong the life of wood for a long time, so it is important to take it with great responsibility.

Join Our Newsletter

more from our blog

Related Posts

Which Coffee Table To Choose and Buy

Which Coffee Table To Choose and Buy

No living room can be imagined without a beautiful coffee table. It's not just a piece of furniture that you can place a book or TV remote on. If you approach the issue creatively, the table can become the central accent of the interior. The article described what...

News & Updates

How to Inspect, Identify, Type of Termites

Termites are a homeowner's worst nightmare because they will reach you at a house and home. You know as a homeowner your biggest investment is your home and if termites are on your property they do a lot of damage. In fact in the U. S. termites do more than five...

5 common side effects of anal sex

Anal sex, it tempts us... but, side effects of anal sex, we fear the worst. We take stock of 5 most common side effects of anal sex that can occur during and after the act. For some time now, you have wanted to be tempted by painless anal sex with your partner. This...

Anal Sex: 5 tips to prepare smooth and painless sex

Almost one in two adults has not yet tested anal sex. Apprehension of pain or fear of living a degrading experience, anal penetration repels some. What if we put our prejudices and bad experiences of anal sex aside? Going off-piste can bring very astonishing...

True / False: 10 misconceptions about anal sex

Anal sex is dirty and it causes hemorrhoids. Condoms and lubricant are not essential for anal penetration. You cannot have an orgasm while being sodomized and men are often more willing than women… We take stock, with our sex therapist, on the received ideas on this...

8 Erogenous zones to stimulate to excite a man

Nipples, neck or buttocks... We often tend to place the penis at the heart of pleasures during sexual intercourse while other erogenous zones of the male body are to be stimulated and can make your companion climb to the sky. Here are some tips and tricks to make him...

Discuss

Leave a Comment

0 Comments

Leave a Reply

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest life improvements tips and updates from our team.

You have Successfully Subscribed!

Pin It on Pinterest

Share This